Genuine KangerTech ™ EVOD Clearomizer

The Authentic KangerTech EVOD is single bottm coil clearomizer with eGo / 510 threaded to work with most eGo / 510 style batteries. These work very well on all the eGo / 510 series batteries, incuding the eGo Twist batteries. The coil is at the bottom of the clearomizer, providing a nice warm vapor, with a excellent flavor, and eliminates wicking problems.

Available colors:
• black,
• cherry,
• stainless,
• purple,
• green,
• pink,
• blue,

Package contains: 
• 1x Genuine KangerTech ™ EVOD Clearomizer with preinstalled 1.8ohm single coil

Specifications for KangerTech EVOD Clearomizer:
• Capacity: 1.6ml
• Thread: eGo / 510
• Type: Replaceable Bottom Single Coil
• Resistance: EVOD comes with single 1.8 ohm coil (Available replacement coils: 1.8 ohm, 2.2 ohm, 2.5 ohm)
• Dimensions: 64.5mm x 14.5mm

Suitable Voltage to different single coil resistance:
• For coil 1.7 - 1.9 ohm use 3.1 - 3.4 Voltage
• For coil 2.1 - 2.3 ohm use 3.5 - 3.8 Voltage
• For coil 2.4 - 2.6 ohm use 3.9 - 4.2 Voltage

Instruction how to fill /refill the KangerTech EVOD clearomizer:
1. Unscrew clearomizer from the battery.
2. Turn the clearomizer upside down ( mouthpiece facing downwards)
3. Next unscrew the metal base of the clearomizer (metal bottom part of clearomizer).
4. Make sure that coil is screwed tight
5. Pour your favourite e liquid into the clearomizer. E liquid always pour on the side \ wall of the tank. (Do not pour e liquid into the center tube)
6. Still keep clearomizer upside down and grab metal base.
7. Now screw the metal base back onto the clearomizer, make sure is screwed tight
8. Now clearomizer is ready to screw onto your battery.
9. It's vaping time!

Instruction how to replace the KangerTech Evod clearomizer coil:
1. Remove the Clearomizer from the battery 
2. Hold Clearomizer in upside down toward the floor.
3. Unscrew the metal base of Clearomizer
4. The metal base to remove the coil (long thin part at the center of the base). Remove the coil from the metal base and throw it.
5. Screw the new coil in place of the old coil (be sure it is tightened, do not remove silicone rubbers)
6. Screw back the metal base to Clearomizer
7. It's vaping time!

IMPORTANT! When using a new coil or clearomizer, let the clearomizer stand for 2 minutes, so the wicks can be saturated with juice /e liquid before firing.Do not let the clearomizer become completely empty. Refill the clearomizer become completely empty. Refill the clearomizer to avoid dry burning or damage to the coil / clearomizer. 

Warranty: 
The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.