Cart

No products

€ 0.00 Shipping
€ 0.00 Total

Checkout

Smok Vape Pen 22 1650mAh

Smok Vape Pen 22

VAPE PEN 22 has the simplicity design, a diameter of 22mm and 1650mAh battery capacity. Meanwhile, re-designed tank will provides you first-rate taste. What’s more, all parts of the VAPE PEN 22 can be detached and reassembled, bringing much more convenience in cleaning and maintenance. Own VAPE PEN 22, you can enjoy high cost-effective and super cool taste.

Smok Vape Pen 22 specifications:

• Material: Stainless Steel
• Size: 22mm x 110mm
• Battery capacity: 1650mAh
• 8 seconds Cut-off
• Low resistance protection
• Short Circuit protection
• Low voltage protection

Inteligent battery life indicator of Vape Pen 22 will show clear promps. The battery life indicator will blink 4 times each time you take a puff. When it blinks fast with 15 times, it indicates that the voltage is lower than 3.3V, please recharge.

How to charge
 Easy to charge via Micro 5pin USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time.

Top-cap filling design. 
1.The tank use new top refill system, you just need to hold the tank with one hand, and use another one to screw off its drip tip and top cap.
2. Add e-liquid through the slot, and pay attantion not to drip in into the central airflow tube.
3. Close the cap carefully and firmly. then let it stand for 5 minutes to get the organic cotton completely saturated.

Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil
1. Make sure the device is turned off
2. Unscrew the top cap and gently remove the glass tube
3. Remove old coil. Screw the new coil tightly all the way in (a loose coil will cause the clearomizer to leak from airflow)
4. Mount the glass tube
5. Now is the time to fill the tank with liquid and screw the top cap. After filling wait 5 min to let liquid soak into the cotton
6. Unlock your device

The kit includes:
• 1x Vape Pen 22 (22mm)
• 1x 0,3Ω Dual Core (Pre-instaled)
• 1x 0,3Ω Dual Core
• 1x USB Charging Cable
• 1x User Manual

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)


IMPORTANT! When using a new coil, let the device stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil. 

The warranty period for particular kit elements is:
2 months from date of purchase:
• Vape Pen 22 Battery

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

Tip - Battery come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times in a row manually to turn the battery either ON or OFF. (Should be done quickly in 2 seconds)

€ 30.00

Add to cart

loading