Eleaf iStick T80 with Pesso Kit

€ 55.00
Availability: This product is no longer in stock
Add to cart

Notify me when available

Eleaf iStick T80 with Pesso Kit

Eleaf iStick T80 with Pesso Kit. The iStick T80, a member of Eleaf iStick family, is the upgraded version of the original iStick TC40W. It is loaded by a 3000mAh battery with a USB Type C output for fast charging and delivers a maximum power of 80 watts for demanding vapers who like to control the amount of vapor they can make.

Eleaf iStick T80 parameters:
• Size: 36mm*28mm*130mm
• Battery capacity: 3000mAh
• Wattage: 1-80W
• E-liquid capacity: 2ml
• Resistance range: 0.05Ω-3Ω
• Weight: 186g

• Simply powerfully smart
• Efficient and minimalist design
• Power in your hand
• Pesso Tank with EF-M 0.6ohm and EF 0.3ohm Coils - 2ml of eliquid capacity tank
• Easy coil change
• Battery comes with the USB C

Eleaf Pesso parameters:
• Height 57mm
• Weight 66g
• Diameter: 25mm
• E-liquid capacity: 2ml

Easy coil change
The two new EF coils are thread-free, making coil change a breeze.

Easy filing system
With Pesso Tank, you simply need to slide the top cap to reach the fill port and slowly fill the tank with e-liquid.

Great battery
comes with the USB C makes fast charging a reality. It will only take you 1 hour and 30 minutes to fully charge the 3000mAh battery of the iStick T80.

Multiple protections
• Over-charge Protection
• Over-discharge Protection
• Over-current Protection
• Over 10s Protection
• Short Circuit Protection

Kit content:
• 1x iStick T80
• 1x Pesso Tank 2ml
• 1x EF-M 0.6ohm Head (Pre-installed)
• 1x EF 0.3ohm Head
• 1x USB Type-C Cable

How to charge
 Easy to charge via Micro 5pin USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time.

How to fill
Top E-liquid Filling: The e-liquid can easily be filled by pushing to side the top cap (find the arrow at the side of top cap). Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.

1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Pull out the coil from the base and fit new. Insert the new coil
5. Screw the base with new coil back onto the clearomizer body.
6. Now is the time to fill the tank with liquid. Let the tank stand for 5 minutes, so the cotton can be saturated with vape juice before using.
7. Screw the clearomizer onto your battery.

Sub ohm device. Worth reading before buying:

This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

The warranty period for particular kit elements is: 
2 months from date of purchase:
• Eleaf iStick T80 battery

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

Tip - All batteries come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times quickly in 2 seconds to turn the battery ON or OFF

IMPORTANT! When using a new atomizer / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer / clearomizer.





€ 40.00
Add to cart Product available with different options