Vaporesso Target PM80 Kit 

Vaporesso Target PM80 Kit with PM80 POD,  GTX Sub ohm coils: 0.2ohm MESH and 0.3ohm MESH

Available colours:
• Silver
• Brown
• Blue
• Black
• Green
• Red

How to charge
• Easy to charge via Micro 5pin USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time.

How to fill



The e-liquid can easily be filled by removing the POD from battery. Please let the POD stand for 5 minutes, so the cotton in coil can be saturated with juice before using.

Note:
1. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
2. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
3. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil



1. Switch off the device
2. Detache POD from the battery.
3. Remove the coil from device and swop with new one
4. Now is the time to fill the POD with liquid. Let the POD stand for 5 minutes, so the cotton can be saturated with vape juice before using.
5. Mount POD in to the battery

Main features: 
• Sub-ohm for DTL
• Max Output of 80W
• GTX Coils
• 0.96 TFT Screen
• Intelligence Involved
• Compact Design

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

The kit contains:
• 1 x VAPORESSO TARGET PM80 Battery
• 2 x VAPORESSO TARGET PM80 POD 2ml
• 1 x GTX 0.2Ω MESH COIL
• 1 x GTX 0.3Ω MESH COIL
• 1 x USB Cable
• 1 x User Manual
• 2 x Airflow Silicone Plugs

The warranty period for particular kit elements is: 
30 days from date of purchase:
• PM80 battery

The warranty does not cover Coils or POD, as these part are quickly used up while the products are put to normal use.

Tip - All batteries come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times quickly in 2 seconds to turn the battery ON or OFF


IMPORTANT! When using a new coil / POD, let the POD stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the POD become completely empty. Refill the POD become completely empty. Refill the POD to avoid dry burning or damage to the coil / POD.