Eleaf MELO 3 Mini
Eleaf MELO 3 Mini
The new MELO III 2ml newly adopts the top e-liquid filling design for ease of refilling e-liquid by removing the top cap only. Its detachable structure brings more convenience in maintenance. All stainless steel construction with hidden airflow control is also a plus to its simple but fashionable appearance.
MELO 3 parameters:
• Diameter: 22mm
• Length: 55mm
• Thread type: 510 thread
• Material: 304 stainless steel
• Color: dazzling, red crackle, brushed black silver, brushed gunmetal, wood grain
Features:
1. Top E-liquid Filling: The e-liquid can easily be refilled by removing the top cap only.
Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
2. Invisible Airflow Control: This new design of the invisible airflow control is also a plus to the fashionable appearance of MELO III
3. Detachable Structure:All the parts of MELO III/MELO III Mini can be detached, bringing more convenience in maintenance
4. Heat-insulated Metal Mouthpiece:The metal mouthpiece packs with excellent characteristic of heat insulation.
How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Unscrew the coil from the base and fit new. Screw the coil tightly all the way in (a loose coil will cause the clearomizer to leak from airflow)
5. Now is the time to fill the tank with liquid. After filling wait 5 min to let liquid soak into the cotton
6. Screw the base with new coil back onto the clearomizer body.
7. Screw the clearomizer onto your battery.
Sub ohm device. Worth reading before buying:
This type of tankis intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual.
For Sub ohm tops we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 50/50 PG / VG or higher VG. Tops of this type produce a lot more of vapour, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)
Content (Simple Pack):
• 1x MELO 3 Mini Atomizer
• 1x EC 0.3ohm Head
• 1x EC 0.5ohm Head
• 4x Seal Ring
• 1x User Manual
IMPORTANT! When using a new coil, let the device stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil.
