SKRR S Mini Tank Vaporesso
SKRR S Mini Tank Vaporesso
SKRR S Mini Tank Vaporesso. Sub-ohm tank which work with QF coils 0.15ohm (Pre-installed) and 0.2ohm Meshed as a spare. 2ml tank which you can fill from the top. Simply twist off the mouthpiece and fill in the e-liquid
SKRR S Mini Tank parameters:
• Diameter: 23mm
• Height: 49.5mm
• E-liquid capacity: 2ml
• Thread type: 510 thread
• Color: black, silver, bronze, rainbow
Easy refilling system
Just unscrew the top of the tank and refill the liquid
How to fill
Top E-liquid Filling: The e-liquid can easily be filled by unscew the top cap. Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.
Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank
How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Unscrew the coil from the base and fit new. Screw the coil tightly all the way in (a loose coil will cause the clearomizer to leak from airflow)
5. Now is the time to fill the tank with liquid. After filling wait 5 min to let liquid soak into the cotton
6. Screw the base with new coil back onto the clearomizer body.
7. Screw the clearomizer onto your battery.
Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.
For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)
SKRR S Mini Tank content:
• 1 x SKRR-S Mini Tank (2ml)
• 1 x QF coils 0.15ohm (Pre-installed)
• 1x 0.2ohm Meshed - spare
• 4 x O-Ring
The warranty does not cover Coils or Clearomizer, as these parts are quickly used up while the products are put to normal use.
IMPORTANT! When using a new coil / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil/ clearomizer.