No products

€ 0.00 Shipping
€ 0.00 Total


Genuine KangerTech ™ EVOD 2 BDC Clearomizer

Genuine KangerTech ™ EVOD 2 BDC Clearomizer

Brand: KangerTech

Genuine KangerTech ™ EVOD 2 BDC Clearomizer

Genuine KangerTech ™ EVOD 2 Bottom Dual Coil Clearomizer

The same clearomizer like in EVOD 2 Dual Starter Kit. Clearomizer work perfect with VV batteries and regular type batteries. We recommend bigger capacity battery for dual coil type clearomizers. 

Available colors:
• black,
• cherry,
• stainless,
• purple,
• green,
• pink,
• blue,

Package contains:
• 1x Genuine KangerTech ™ EVOD 2 BDC Clearomizer with preinstalled 1.8ohm dual coil

Specifications for KangerTech EVOD 2 BDC Clearomizer:
• Capacity: 1.6ml
• Thread: eGo / 510
• Type: Replaceable Bottom Dual Coil ( BDC )
• Resistance: EVOD 2 comes with 1.5 ohm dual coil (Available replacement coils: 0.8 ohm, 1.0 ohm, 1.2 ohm, 1.5 ohm and 1.8 ohm)
• Dimensions: 64.5mm x 14.5mm

Instruction how to fill /refill the KangerTech EVOD 2 BDC clearomizer:
1. Unscrew clearomizer from the battery.
2. Turn the clearomizer upside down ( mouthpiece facing downwards)
3. Next unscrew the metal base of the clearomizer (metal bottom part of clearomizer).
4. Make sure that coil is screwed tight
5. Pour your favourite e liquid into the clearomizer. Always pour eliquid on the side \ wall of the tank. (Do not pour e liquid into the center tube)
6. Still keep clearomizer upside down and grab metal base.
7. Now screw the metal base back onto the clearomizer, make sure is screwed tight
8. Now clearomizer is ready to screw onto your battery.
9. It's vaping time!

Instruction how to replace the KangerTech Evod 2 BDC clearomizer coil:
1. Remove the Clearomizer from the battery
2. Hold Clearomizer in upside down toward the floor.
3. Unscrew the metal base of Clearomizer
4. The metal base to remove the coil (long thin part at the center of the base). Remove the coil from the metal base and throw it.
5. Screw the new coil in place of the old coil (be sure it is tightened, do not remove silicone rubbers)
6. Screw back the metal base to Clearomizer
7. It's vaping time!

IMPORTANT! When using a new coil or clearomizer, let the clearomizer stand for 2 minutes, so the wicks can be saturated with juice /e liquid before firing.Do not let the clearomizer become completely empty. Refill the clearomizer become completely empty. Refill the clearomizer to avoid dry burning or damage to the coil / clearomizer. 

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

Official KangerTech Authorized Distributor for eCigarettesWorld Ireland

€ 4.50

Add to cart