Aspire K2 Clearomizer

Aspire K2 Clearomizer is made from stainless steel and PYREX glass. With the 510 thread the Aspire K2 can be adapted to work with batteries of various sizes

Technical parameters:
• Clearomizer capacity: 1.8ml
• Coils resistance: 1.6 Ohm (3.0 - 4.2V)
• Thread: 510
• Drip made from stainless steel
• Dimensions:
   - Diameter: 15 mm
   - Height (with drip): 59 mm
• Bottom fill clearomizer

How to fill the clearomizer
1. Make sure the clearomizer is detached from the battery. 
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor. 
3. Unscrew the base of the clearomizer (the part that screws into the battery). 
4. Fill your liquid into the tank, making sure to pour it in from the side, so that the liquid is cascading down the sides of the tank walls. make sure not to get any liquid into the center airflow hole. 
5. Screw the base back onto the clearomizer body. Let the tank stand for 5 minutes, so the cotton can be saturated with vape juice before using.
6. Screw the clearomizer onto your battery. 
7. Vape and enjoy! 

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Unscrew the coil from the base and fit new. Screw the coil tightly all the way in (a loose coil will cause the clearomizer to leak from airflow)
5. Now is the time to fill the tank with liquid.
6. Screw the base with new coil back onto the clearomizer body.
6. Screw the clearomizer onto your battery.

IMPORTANT! When using a new coil / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer / clearomizer.

The kit contains:
• Aspire K2 Clearomizer
• Coil 1.6ohm (pre instaled)