Innokin Endura T18E Replacement Coil

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer
4. Pull out the coil from the base and fit new. Make sure that coil sit properly in to the slot (a loose coil will cause the clearomizer to leak from airflow)
5. Screw the base back (if you see gap between tank and base cap it's mean coil was wronly fited)
6. Screw the clearomizer onto your battery.

Content:
• 1x Innokin Endura T18E 1.5ohm Coil - 100% Organic Cotton Wicking 

The heating unit is a replaceable part (the part wears out over time) 

Fits to:
• Innokin Endura T18E Kit
• Innokin Prism T18E
• T18E Pro

Price for 1 unit / coil


IMPORTANT! When using a new coil, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil