Innokin Endura Prism S / T20S Replacement Coil

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer
4. Pull out the coil from the base and fit new. Make sure that coil sit properly in to the slot (a loose coil will cause the clearomizer to leak from airflow)
5. Screw the base back (if you see gap between tank and base cap it's mean coil was wronly fited)
6. Screw the clearomizer onto your battery.

Content:
• 1x Innokin Endura Prism S / T20S Replacement Coil 0.8ohm 16W-18W

The heating unit is a replaceable part (the part wears out over time) 

Fits to:
• Innokin Endura T22S Kit
• Innokin Endura Prism S Tank

Price for 1 unit / coil


IMPORTANT! When using a new coil, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil