Eleaf MELO 5 2ml Atomizer

Eleaf MELO 5 2ml Atomizer features the smart top childproof structure. This childproof safety design makes refilling the e-liquid and replacing coils easier and more convenient. Otherwise, two different mesh coils are available in this kit, the EC-S 0.6ohm Head and the EC-M 0.15ohm Head, proving you different and intense vaping experience.

Eleaf MELO 5 atomizer parameters:
• Diameter: 26.5mm
• Height: 57.3mm
• E-liquid capacity: 2ml
• Weight: 63.5g
• Thread type: 510 thread
• Color: Silver, Black

Smart Top Childproof Structure
MELO 5 atomizer is smartly designed with an easy top fill solution as well as a lock system on the top cap for child’s security.

Creative Bottom Lock System
There is also a childproof lock system on the bottom of the MELO 5. When the user unscrew the atomizer head, it automatically closes the e-liquid inlet to prevent the e-liquid from flowing out.

How to fill
Top E-liquid Filling: The e-liquid can easily be filled
1. Lift up the top cap
2. Push the top cap to the side
Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.

Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Unscrew the coil from the base and fit new. Screw the coil tightly all the way in (a loose coil will cause the clearomizer to leak from airflow)
5. Now is the time to fill the tank with liquid. After filling wait 5 min to let liquid soak into the cotton
6. Screw the base with new coil back onto the clearomizer body.
7. Screw the clearomizer onto your battery.

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 50/50 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

MELO 5 content:
• 1×Melo 5 Atomizer (2ml)
• 1×EC-S 0.6ohm
• 1×EC-M 0.15ohm
• Spare Parts
• User Manuals

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.