Smok Stick P25 Prince Kit

Stick Prince combination of 3000mAh battery and TFV12 Prince tank.

It is newly designed, with a special hexagon power button and a carefully carved battery base you can feel how exquisite it is.

Stick Prince's large battery capacity is the best guarantee for long time vaping and LED indicator on its body can tell you the specific conditions of itself.

The TFV12 Prince tank has 2ml capacity and hyper engines, which can bring you massive vapor.

Besides, the tank's patented locking mechanism can effectively solve the leakage problem. Innovation keeps changing the vaping experience!


Stick P25 specyfication:
• Size: 24.5 mm x 85mm
• Battery Capacity: 3000mAh
• Standby Current: <200uA
• Weight: 88.5g
• Voltage Range: 3.4V - 4.2V
• Heitght 85mm
• Width 24.5mm
• Weight 88.5mm

TFV12 P-Tank specyfication:
• Material: Stainless Steel
• Weight: 63g
• Size: 25.5 x 63mm
• Capacity: 2.0ml
• Thread: 510
• Height: 63mm
• Diameter 25,5mm
• Weight: 63g


Top-cap filling design. Top rotary refill makes filling a easy thing. Leak proof slot can significantly solve leaking problem.

1. Hold the tank with one hand and use another one to press top cap and move it counterclockwise.
2. Add e-liquid through the slot, and pay attantion not to drip in into the central airflow tube.
3. Close the cap carefully and firmly. Then let it stand for 5 minutes to get the organic cotton completely saturated.

Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Unscrew the coil from the base and fit new. Screw the coil tightly all the way in (a loose coil will cause the clearomizer to leak from airflow)
5. Now is the time to fill the tank with liquid. After filling wait 5 min to let liquid soak into the cotton
6. Screw the base with new coil back onto the clearomizer body.
7. Screw the clearomizer onto your battery.

How to charge
• Easy to charge via Micro 5pin USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

The kit includes:
• 1x Stick P25
• 1x TFV12 P-Tank (2ml)
• 1x V12 P - Tank M4 (0,17Ω Quadruple Coil) (Pre-installed)
• 1x V12 P - Tank M4 (0,17Ω Quadruple Coil)
• 1x USB cable

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

IMPORTANT! When using a new coil, let the device stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil. 

The warranty period for particular kit elements is:
30 days from date of purchase:
• Stick P25 battery (3000mAh)

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

Tip - Battery come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times in a row manually to turn the battery either ON or OFF. (Should be done quickly in 2 seconds)