Innokin 18X Kit

Innokin T18X Kit with 1000mAh battery and Prism T18E tank with T18E coils

Main features:
• Battery Capacity: 1000mAH Li-Po battery
• Maximum Output Wattage：13.5W
• Resistance range: 1.3 ohm - 3.5 ohm
• Maximum Output Currency: 3.5A
• Charging: Micro USB DC 5V/0.5A

How to charge
• Easy to charge via C-type USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

When Charging or Using the device:
The Endura T18X battery level status is displayed via:
Green = above 60% green light when is fully charged the light will turn off
Yellow = above 20% and under 60% yellow lightbattery
Red =  battery under 20% red light battery 

How to fill the Innokin Clearomizer:
1. Unscrew the top.
2. Tilt clearomizer at 45 degree angle.
3. Insert needle tip and fill with e-liquid (avoid small metal hole)
4. Fill clearomizer to top fill line.
5. Screw top back on.

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer
4. Pull out the coil from the base and fit new. Make sure that coil sit properly in to the slot (a loose coil will cause the clearomizer to leak from airflow)
5. Screw the base back (if you see gap between tank and base cap it's mean coil was wronly fited)
6. Screw the clearomizer onto your battery.

Contents:
• 1x Endura 18 X Battery
• 1x Prism T18E Tank
• 1x Prism T18E Coil (1.5ohm)
• 1x Spare Drip Tip
• 1x Quick Start Guide
• 1x USB C-type Charging Cable
• 1x User Packet

The warranty period for particular kit elements is: 
1 month from date of purchase:
• 1000 mAh battery 

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

Tip - The batteries all come with a 3-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 3 times in a row manually to turn the battery either ON or OFF. 

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 50/50 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)