Eleaf iStick i40 with GTL D20 Tank

Eleaf iStick i40 with GTL D20 Tank

YouTube Video ecigarettes Watch video manual

Brand: Eleaf - iSmoka

Eleaf iStick i40 with GTL D20 Tank

€ 50.00

Add to cart

Eleaf iStick i40 with GTL D20 Tank

Eleaf iStick i40 with GTL D20 Tank. Five colors: Cyan, Neon Orange, Fuchsia Pink, Greenery, Black and 2600mAh build in battery. Is Ultra compact and comfortable to hold and carry. The redefined GTL coils present a consistent and enhanced flavor for every puff. 

Eleaf iStick i40 specification:
• Size: 34.8mm*25.2mm*126.3mm
• Battery capacity: 2600mAh
• Wattage: 1-40W
• E-liquid capacity: 2ml
• Variable Voltage (VV): 0.5-8V
• Charging Current: 5V/1A (USB-C)

• Eye-poping colors
• Comfortable Grip
• Power in your hand
• GTL D20 Tank with GTL 0.8ohm and GTL 1.2ohm Coils - 2ml of eliquid capacity tank
• Easy coil change
• Battery comes with the USB C


Easy coil change

Easy filing system

Great battery
comes with the USB C makes fast charging a reality. It will only take you 1 hour and 30 minutes to fully charge the 2600mAh battery of the iStick i40.

Multiple protections
• Over-charge Protection
• Over-discharge Protection
• Over-current Protection
• Over 10s Protection
• Short Circuit Protection

Kit content:
• 1x iStick i40
• 1x GTL D20 Tank
• 1x GTL 1.2ohm coil
• 1x GTL 0.8ohm coil
• 1x USB Type-C Cable
• User Manual

How to charge
 Easy to charge via Type-C USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

How to fill
Top E-liquid Filling: The e-liquid can easily be filled by pushing to side the top cap. Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.

1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Pull out the coil from the base and fit new. Insert the new coil
4. Now is the time to fill the tank with liquid. Let the tank stand for 5 minutes, so the cotton can be saturated with vape juice before using.
5. Connect the clearomizer onto your battery.

Sub ohm device. Worth reading before buying:

This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

The warranty period for particular kit elements is: 
2 months from date of purchase:
• Eleaf iStick i40 battery

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

Tip - All batteries come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times quickly in 2 seconds to turn the battery ON or OFF

IMPORTANT! When using a new atomizer / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer / clearomizer.