Aspire K3 Quick Start Kit

€ 25.00

Add to cart

Aspire K3 Quick Start Kit

Aspire K3 Quick Start Kit. The K3 brings you an open source tank and battery system that is reusable and rechargeable and best of all the K3’s tank is refillable. So you’re never limited when it comes to flavor! Available as shown, a black battery with the black tank and the pink battery with the silver tank. The K3 battery operates at a set fixed 5.5 Volts which is around 16 watts using a 1.8 ohm coil or 18 Watts using a 1.6 ohm replacement coil. Charges by USB pass-through at the base of the battery.

Aspire K3 Quick Start Kit:
• Diameter: 18mm
• Height: 139mm
• E-liquid capacity: 2ml
• 1.8ohm (4,2 - 5,0V) 
• Battery capacity: 1200mAh
• Kanthal with Organic cotton
• Color: black, pink Carbon Fiber
• Micro USB charging port
• Standard 510 connection with airflow inlets
• Bottom fill clearomizer
 
Tip - The batteries all come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times in a row manually to turn the battery either ON or OFF.  

How to charge
 Easy to charge via Micro 5pin USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

How to fill clearomizer
1. Make sure the clearomizer is detached from the battery. 
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor. 
3. Unscrew the base of the clearomizer (the part that screws into the battery). 
4. Fill your liquid into the tank, making sure to pour it in from the side, so that the liquid is cascading down the sides of the tank walls. make sure not to get any liquid into the center airflow hole. 
5. Screw the base back onto the clearomizer body. Let the tank stand for 5 minutes, so the cotton can be saturated with vape juice before using.
6. Screw the clearomizer onto your battery. 
7. Vape and enjoy! 

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Unscrew the coil from the base and fit new. Screw the coil tightly all the way in (a loose coil will cause the clearomizer to leak from airflow)
5. Now is the time to fill the tank with liquid.
6. Screw the base with new coil back onto the clearomizer body.
7. Screw the clearomizer onto your battery.

Content:
• 1x K3 Clearomizer 1.8ohm (4,2 - 5,0V)
• 1x K3 Battery
• 1x 1.8ohm (4,2 - 5,0V) - Aspire Nautilus Coils
• 1x USB Cable
• 1x User Manual

IMPORTANT! When using a new coil / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil / clearomizer.

The warranty period for particular kit elements is: 
30 days from date of purchase:
• K3 battery

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

30 other products in the same category:

loading