Vaporesso GEN 200 with iTank 

 Vaporesso GEN 200 dual battery kit. Use innovative iTank, it provides a flavorful and worry-free vaping experience with theTurbo Airflow System and Liquid Self Cleaning System. The GTi coil platform gives you more options to choose a powerful DTL experience. The simplified outside look and inside operations allows you to get power GEN 200 simply and effortlessly.

High Flavor Reproduction
Turbo Airflow System for Smoother and Quieter Experience

Worry Less, Enjoy More
Reducing the Leakage by Liquid Self Cleaning System

Easy To Use
Top Filling by easily slide and open

Available colours:
• Dark Black
• Light Silver
• Aurora Green

Specyfication:
• Dimension: 138.5x44x29mm
• Output Wattage: 5-220W
• Display: 0.96" TFT Screen
• Battery Capacity: 2x18650 (Not included)
• Coil Resistance: GTi 0.2Ω Mesh, GTi 0.4Ω Mesh, GTi 0.15Ω Mesh, GTi 0.5Ω Mesh
• Charging Current: DC 5V/2A, Type-C

How to charge
• Easy to charge via Type-C USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

How to fill
The e-liquid can easily be filled from top by pushing to side the top cap (find the arrow at the side of the top cap). Fill liquid to the hole at the side. Please let the tank stand for 5 minutes. Cotton will absorb liquid and will not burn straightaway.

Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer (the part that screws into the battery).
4. Pull out the coil from clearomizer and swap with new one
5. Screw the base onto the clearomizer body.
6. Now is the time to fill the tank with liquid. Let the tank stand for 5 minutes, so the cotton can be saturated with vape juice before using.
7. Screw the clearomizer onto your battery.

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

The kit contains:
• 1 x Vaporesso GEN 200 MOD
• 1 x Vaporesso iTank 2ml
• 1 × GTi 0.2Ω Mesh coil (60-75W) (Pre-installed)
• 1 × GTi 0.4Ω Mesh coil (50-60W)
• 1 × Spare Parts
• 1 × USB Cable
• 1 × User Guide

The warranty period for particular kit elements is: 
2 months from date of purchase:
•  GEN 200 MOD

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

Tip - All batteries come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times quickly in 2 seconds to turn the battery ON or OFF


IMPORTANT! When using a new atomizer / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer / clearomizer.