Eleaf iStick S80 2ml Kit

€ 59.50
Availability: This product is no longer in stock
Add to cart

Notify me when available

Eleaf iStick S80 2ml Kit

Eleaf iStick S80 2ml Kit
Eleaf iStick S80 has a built-in 1800mAh battery that can provide a maximum output power of 80W. You can freely adjust the power through the two buttons on the side of the fuselage. The minimum power is 1W and the maximum power is 80W. There is also a 0.96-inch color display on the body of the Eleaf iStick S80, which can clearly display various Vaping parameters, including remaining battery power and other parameters. In addition, you can quickly charge the iStick S80 via USB Type-C, which means you don’t have to wait too long for charging.

Eleaf GZeno Tank is used with Eleaf iStick S80. The tank is made of heat-resistant glass and stainless steel, which is very durable. Eleaf GZeno Tank with 2ml e-liquid capacity and the top filling method is very simple and convenient. In addition, the Eleaf iStick S80 kit also contains 2 Eleaf GZ 1.2Ω coils with a resistance of 1.2ohm. The Gzeno was specifically designed by Eleaf for MTL style vaping and flavor production.

By combining Eleaf iStick S80 with Eleaf GZeno Tank, it can provide unparalleled flavor and the best vape experience.

Eleaf iStick S80 parameters:
• Size: 113.5mm x 33.5mm x 25.5mm
• Battery Capacity: 1800mAh
• Tank Capacity: 2ml
• Output Wattage: 1 - 80W
• Resistance Range: 0.1Ω - 3.0Ω
• Screen Size: 0.96''
• Weight: 190g
• Tank Material: Pyrex Glass with Stainless Steel
• Battery Material: Zinc Alloy

• All metallic finish with intrecciato design
• GZeno Tank and New GZ 1.2ohm Coil for MTL Vaping
• Built-in 1800mAh
• Smart Mode
• Max Power 80W
• USB Type-C and Fast Charging
• Convenient Top Fill


Easy coil change

Eleaf iStick S80 2ml coil change GZ coils E Cigarettes World in Vaping Ireland

How to fit / exchange coil
1. Please see the picture above
2. After filling wait 5 min to let liquid soak into the cotton
3. Screw the clearomizer onto your battery.

Easy filing system

Eleaf iStick S80 2ml tank fill E Cigarettes World in Vaping Ireland

How to fill
Top E-liquid Filling: 5V/2A USB-C.
Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.

1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

Multiple protections
• Over-charge Protection
• Over-discharge Protection
• Over-current Protection
• Over 10s Protection
• Short Circuit Protection

Kit content:
• 1 x iStick S80 Battery
• 1 x GZeno Tank
• 2 x GZ 1.2ohm Coil
• 1 × USB Type-C Cable

How to charge
 Easy to charge via 5V/2A USB-C port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

Eleaf iStick S80 2ml vape Battery Specification

Tip - All batteries come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times quickly in 2 seconds to turn the battery ON or OFF

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

The warranty period for particular kit elements is: 
2 months from date of purchase:
• Eleaf iStick S80 battery

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.

IMPORTANT! When using a new atomizer / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer / clearomizer.