Eleaf iStick P100 Pod Mod Kit 100W 3400mAh

Eleaf iStick P100 Pod Mod Kit 100W 3400mAh
iStick P100 equiped with a 3400mAh built-in battery with a maximum output of 100W. It has a 1.14-inch TFT display that can clearly show all vaping data. The Type-C 5V/2A fast charge will save charging time.

Cartridge used in Eleaf iStick P100 has 2ml e-liquid capacity. Filling e-liquid is also very convenient. It will bring consistent and the ever dense vapor with the brand new Eleaf GZ coils. Eleaf GZ 0.2ohm coils (Wattage Range: 45-65W) and Eleaf GZ 0.4ohm coils (Wattage Range: 20-35W) are designed for ever dense vapor and great flavor with the maximized interaction between e-liquid and cotton.

The Eleaf iStick P100 is equiped in regular POWER mode and easy-to-use SMART mode. In SMART mode, device will intelligently identify your favourite output for each coil. Each time you plug the cartridge, you will get your favourite output for the coil .

Eleaf iStick P100 parameters:
• Size: 39.6mmx29.5mmx106.4mm
• Battery Capacity: 3400mAh
• Max Wattage: 100W
• Charging Current: 5V/2A (USB-C)
• Screen Size: 1.14'' TFT
• Mod Material: Zinc Alloy+PC

Features:
• Luxurious Metal Texture
• Built-in 3400mAh Battery
• 100W Maximum Output
• 2ml Refillable Pod
• 1.14-inch TFT Display Screen
• Power & Smart Vape Modes
• Type-C 5V/2A Fast Charge
• GZ 0.2Ω Coil For DL Vaping
• GZ 0.4Ω Coil For Half-DL Vaping

Easy coil change

How to fit / exchange coil
1. Please see the picture above
2. After filling wait 5 min to let liquid soak into the cotton
3. Screw the clearomizer onto your battery.

Easy filing system

How to fill
Top E-liquid Filling: 5V/2A USB-C.
Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.

Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

Multiple protections
• Over-charge Protection
• Over-discharge Protection
• Over-current Protection
• Over 10s Protection
• Short Circuit Protection

Kit content:
• 1 x iStick P100 Mod
• 1 x iStick P100 Cartridge (2ml)
• 1 x GZ 0.2ohm Coil
• 1 x GZ 0.4ohm Coil
• 1 × USB Type-C Cable

How to charge
• Easy to charge via 5V/2A USB-C port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

Tip - All batteries come with a 5-Click ON/OFF feature. This can help prevent you from unintentionally turning the battery ON. Simply press the button 5 times quickly in 2 seconds to turn the battery ON or OFF

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

The warranty period for particular kit elements is: 
2 months from date of purchase:
• Eleaf iStick P100 battery

The warranty does not cover Coils or Clearomizer, as these part are quickly used up while the products are put to normal use.


IMPORTANT! When using a new atomizer / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer / clearomizer.