Aspire Cyber X Kit

Aspire Cyber X Kit Comes with 2ml pod an ergonomic design and the “box-like” form factor, the Cyber X is suited for discreet and compact form vaping needs. With a 3.7V output and a battery capacity of 1000 mAh

Aspire Cyber X Kit:
• Pod e-liquid capacity: 2ml
• Resistance: 0.8 ohm or 1.0 ohm 
• 1000 mAh Battery Capacity
• USB-C charging port

• Two options with airflow - depending on how the Pod is inserted
• You can vape by pressing a button or by switching to vaping while inhaling or both options can be active at the same time (3 click option - for details please see manual)

Content:
• 1x Cyber X Device (1000 mAh)
• 1x TSX Pod 0.8Ω (2ml preinstalled)
• 1x TSX Pod 1.0Ω (2ml preinstalled)
• 1x Type-C Cable
• 1x Lanyard

How to charge
• Easy to charge via USB-C port. When battery indicate that is full, disconnect the wire. Never leave connected for night time and never leave the device connected to the charger unattended. If you do, you do so at your own risk.

How to fill
Take out the used POD from the battery and hold it horizontally. Pull out the silicone plug from the side of the POD. Fill eliquid through the hole. Put the silicone plug back in place firmly after filling is finish.

Please let the POD stand for 5 minutes, so the cotton in coil can be saturated with juice before using.

Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank. Recomended PG:VG ratio is 50:50

IMPORTANT! When using a new coil, let the device stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil. 

The warranty period for particular kit elements is: 
30 days from date of purchase:
• Cyber X Device

The warranty does not cover Coils or POD, as these part are quickly used up while the products are put to normal use

IMPORTANT! When using a new coil / POD, let the POD stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the POD become completely empty. Refill the POD become completely empty. Refill the POD to avoid dry burning or damage to the coil / POD.