PnP Pod Tank - VooPoo

PnP Pod Tank  - VooPoo. Sub-ohm tank which work with PnP coils PnP-VM1 0.3ohm and 0.15ohm in the box. 2ml tank which you can fill from the tbottom. 

SKRR S Mini Tank parameters:
• Diameter: 26mm
• Height: 44mm
• E-liquid capacity: 2ml
• Thread type: 510 thread
• Color: black, silver

How to fill
Bottom filling system. Remove with just one hand, and you'll experience a simpler and cleaner way of filling oil. Please let the tank stand for 5 minutes, so the cotton can be saturated with juice before using.

Note:
1. Please don’t add e-liquid into the air pipe.
2. Please don’t overfill and make sure the e-liquid level is between 10%-90%.
3. Please first drip a few drops of e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Please use proper PG/VG ratio liquids for this type of tank

How to fit / exchange coil
1. Detache POD from the battery.
2. Remove the coil from pod and swop with new one
3. Now is the time to fill the POD with liquid. Let the POD stand for 5 minutes, so the cotton can be saturated with vape juice before using.
4. Mount POD in to the battery

Sub ohm device. Worth reading before buying:
This type of device is intended for the user with grater knowledge and experience. Coils used are below 1.0 ohm so that higher Wattage could be used. Before you use please read manual. Often, this kits are equipped with additional options that allow you to adjust Wattage.

For Sub ohm devices we recommend that you do not use liquids with nicotine higher than 6mg / ml and only good quality liquids with 30/70 PG / VG or higher VG. Devices of this type produce a lot more of vape, which results in a stronger hit to the throat (like higher nicotine in the basic device). Ask if you're not sure ... we don't bite ;-)

VooPoo PnP Pod Tank content:
• 1 x PnP Pod Tank (2ml)
• 1 x PnP-VM1 0.3ohm
• 1 x pnP-VM6 0.15ohm

The warranty does not cover Coils or Clearomizer, as these parts are quickly used up while the products are put to normal use.

IMPORTANT! When using a new coil / clearomizer, let the tank stand for 5 minutes, so the cotton can be saturated with juice before firing. Do not let the tank become completely empty. Refill the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil/ clearomizer.